Knucklehead Saloon Posted September 18, 2017 Share Posted September 18, 2017 Does anyone know if these are still available genuine/aftermarket ? If not does anything else fit from a different model or make ? Cheers Richo. Quote Link to comment Share on other sites More sharing options...
jono Posted September 19, 2017 Share Posted September 19, 2017 The 2nd gen are a two wire switch not sure if it is pos or neg switching there. Many other makes n models I have pinched switches from are single wire which may work if ours are earth switching but suspect not. I just cleaned mine out with mx3, to working and found a near suitable rubber boot added silicone to hold switch in place and boot on. Working fine now. Thinking we need a timed button push on dash Quote Link to comment Share on other sites More sharing options...
jono Posted September 19, 2017 Share Posted September 19, 2017 That reply above based on work on my 89 ute. Just found switch from my old 84 ute and it is two wire but one wire makes contact with body ground as well. I was eyeing off nice mounting booted switches of early liberty one wire body grounding type.has a screw to hold switch in place instead of luck. May be correct length for us. I have also used L series door switch but need end to pack door side to make it switch off Quote Link to comment Share on other sites More sharing options...
Knucklehead Saloon Posted September 19, 2017 Author Share Posted September 19, 2017 Thanks a bunch for the info Jono !! Helps heaps. Quote Link to comment Share on other sites More sharing options...
Al Zhiemer Posted September 20, 2017 Share Posted September 20, 2017 Not sure this helps or not but I'm pretty sure I've got a couple of spares floating around if you need. Cheers Quote Link to comment Share on other sites More sharing options...
Knucklehead Saloon Posted September 23, 2017 Author Share Posted September 23, 2017 Oh yeah that'll help Al !! Quote Link to comment Share on other sites More sharing options...
Al Zhiemer Posted September 24, 2017 Share Posted September 24, 2017 Hi, Sorry for not getting back to you sooner, have had a fair bit on lately. Will PM you with some details. Cheers, Al Quote Link to comment Share on other sites More sharing options...
Knucklehead Saloon Posted September 24, 2017 Author Share Posted September 24, 2017 Thanks Al. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.