Jump to content
Ultimate Subaru Message Board

86 brat with weber questions


Recommended Posts

The carb is the weber 32/36 dgav 33b1, im not the one who did the weber swap. In the front of the carb there is something missing, after some searching i think its the primary idle jet and holder for it. I was able to plug it with a small alin bolt with the same thread. Now it will idle but what will happen if i dont replace the jet that's supposed to be in there? Is there a shop that i can go to in person that carries parts for this? (in California) The local o'reilly's does not have anything for it. I tried to order a new jet and holder online but its not right...

Link to comment
Share on other sites

If it's one of two openings on the front (facing the bumper of the car) they are both vacuum ports. I forget exactly, but the left one is connected and the right one can be plugged.

 

try looking through loyale 2.7's weber swap guide and i bet it's there somewhere.

 

the primary idle jet is on the driver's side of the carb, if i remember correctly. i can also check tomorrow. can you take a picture of what's missing?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...