Bratastick Posted September 23, 2017 Share Posted September 23, 2017 I'm getting good squirt action on the primary barrel, isn't the secondary barrel supposed to squirt as well? It's there just no output. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 24, 2017 Share Posted September 24, 2017 The default accelerator pump nozzle is not drilled on the secondary side. I think the dual nozzles are primarily for the 38DGAS when used with synchronous linkage, etc. GD Quote Link to comment Share on other sites More sharing options...
Bratastick Posted September 24, 2017 Author Share Posted September 24, 2017 Thanks. I'm getting a little flat spot when transitioning to the secondary and first thought was the accelerator pump. Quote Link to comment Share on other sites More sharing options...
Phizinza Posted September 24, 2017 Share Posted September 24, 2017 Increase secondaries idle jet size. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 25, 2017 Share Posted September 25, 2017 Yes - increase secondary idle jet. If you have a flat spot off idle then increase primary idle jet. GD Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.