steve56 Posted January 23, 2018 Share Posted January 23, 2018 (edited) Reinstalled engine after doing head gaskets. Its turning over and getting fuel, but not starting. Haven't checked for spark yet because dont have a helper to turn it over. The cruse control light is on and cooling fans are running with the key on. Edited January 23, 2018 by steve56 1 Quote Link to comment Share on other sites More sharing options...
montana tom Posted January 23, 2018 Share Posted January 23, 2018 Make sure the large connectors at rear pass side are snapped together well. Then check crank and cam sensors are connected. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted January 23, 2018 Share Posted January 23, 2018 Forgot to plug in coolant temp sensor. Pull codes. GD Quote Link to comment Share on other sites More sharing options...
steve56 Posted January 23, 2018 Author Share Posted January 23, 2018 (edited) Forgot to plug in coolant temp sensor. Pull codes. GD First code is: coolant temp sensor circuit high voltage. Second code is: p0700 Transmission Control Malfunction Great call. The coolant temp sensor was unplugged. Plugged it in and it started right up. Thank you. Edited January 24, 2018 by steve56 Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted January 24, 2018 Share Posted January 24, 2018 Yeah that will get ya every time. Glad I could help. GD 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.