Tireman28 Posted February 19, 2018 Share Posted February 19, 2018 what type of wiring harness do i need to get that wrk with this transmission? the cr is an 2003 impreza that had a 2.o turbo stock. i ttok the motor out of a forester. its an ej25 na, sohc. wondering what kind of wiring harness i need to get, or have one made. and if i need one made who can make them. its for a round track asphalt race car. 1 Quote Link to comment Share on other sites More sharing options...
pontoontodd Posted February 19, 2018 Share Posted February 19, 2018 I think you're going to need a lot more than a harness and the transmission is the least of your problems. It will almost certainly not be worth your time to make that work, but hopefully for your sake I'm wrong. Quote Link to comment Share on other sites More sharing options...
Gloyale Posted February 19, 2018 Share Posted February 19, 2018 I think you're going to need a lot more than a harness and the transmission is the least of your problems. It will almost certainly not be worth your time to make that work, but hopefully for your sake I'm wrong. ??? No different than a harness strip to run an EJ in an older subaru. Not that difficult in terms of getting the engine running. Now the DCCD control of the six speed? not hard, just $$$ for an aftermarket standalone controller. readily available though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.