jono Posted June 13, 2018 Share Posted June 13, 2018 I need to resolve an issue ... Quote Link to comment Share on other sites More sharing options...
el_freddo Posted June 14, 2018 Share Posted June 14, 2018 Don't we all... The joys of messing around with old parts, not to mention rare ones. No way of repairing the centre diff, shims etc? This is something I've looked into but have not acted upon as I don't need to atm. All the best. Cheers Bennie Quote Link to comment Share on other sites More sharing options...
jono Posted June 14, 2018 Author Share Posted June 14, 2018 Half roller bearings inside ripped into both hardened surfaces and cannot separate the rest of it as it looks so shagged Quote Link to comment Share on other sites More sharing options...
el_freddo Posted June 15, 2018 Share Posted June 15, 2018 Yeah that's probably "a bit" beyond repair ;( Bennie Quote Link to comment Share on other sites More sharing options...
ausubaru92 Posted June 18, 2018 Share Posted June 18, 2018 How different is the EJ centre diff? Why not upgrade and add an EJ rear housing and you gain the viscous LSD centre Quote Link to comment Share on other sites More sharing options...
el_freddo Posted June 18, 2018 Share Posted June 18, 2018 Pinion shaft is shorter for starters. There's no locking mechanism either. Rear housing would need to move with the centre diff of choice as does the matching pinion shaft. I'm sure the centre diff cases are very different so no swaps possible there either. Then shifter, tail shaft and gearbox crossmember mods are needed - but I reckon mods for the ea82 setup would be needed in a brumby anyway, just done differently to fitting the EJ AWD rear housing. Cheers Bennie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.