mkoch Posted July 16, 2018 Share Posted July 16, 2018 One front wheel stud is broken off of my 1984 gl 4wd. Do I need to replace the whole plate? Quote Link to comment Share on other sites More sharing options...
mkoch Posted July 16, 2018 Author Share Posted July 16, 2018 I was able to pound the wheel stud out! Any suggestions on how to press in the new one? Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 16, 2018 Share Posted July 16, 2018 Old lug nut, fender washer, and some grease is the easiest DIY way. Or pull the hub off and hammer it in with a socket supporting the hub on the threaded side. GD 3 2 Quote Link to comment Share on other sites More sharing options...
mkoch Posted July 17, 2018 Author Share Posted July 17, 2018 Thank you GeneralDisorder, your way worked. 1 Quote Link to comment Share on other sites More sharing options...
HUAWEI3054 Posted August 11, 2018 Share Posted August 11, 2018 SPRAY WD-40 ON IT AND WAIT ONE HOUR THEN TAKE I GOOD PUNCH AND HIT IT WITH A LARGE HAMMER THE NEW ONE PUT IN AND TAKE A WHEEL NUT AND TIGHTEN IT DOWN AND IT WILL SINK IN TO THE SPLINES Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.