jono Posted September 10, 2018 Share Posted September 10, 2018 (edited) Can't find 92ausubaru post looking for this...I have this dizzy with body loom side plugged in for a few inches White dizzy sides to black Black dizzy to black/red Green dizzy side to white Red dizzy side to red Black/red body side is only one not shielded Edited September 10, 2018 by jono Quote Link to comment Share on other sites More sharing options...
ausubaru92 Posted September 10, 2018 Share Posted September 10, 2018 Thanks Same colours as the 88XT but with reference and position wires reversed. Should mean that +12v (red) and Gnd (black/red) are correct which is the main thing Quote Link to comment Share on other sites More sharing options...
ausubaru92 Posted September 12, 2018 Share Posted September 12, 2018 Just for a point of interest. the Subaru optical distributor uses a J912 Mitsubishi Crank Angle Sensor that is also found in these vehicles 1993-1998 Mercury Villager 3.0 1991-1994 Infiniti G20 SR20DE 1988-1990 Isuzu Trooper 2.6/2.8 1984-1986 Nissan S12 200SX CA18ET 1989-1990 Nissan S13 240SX KA24E 1981-1983 Nissan S130 280ZX Turbo 1984-1989 Nissan Z31 300ZX VG30/VG30T 1986 Nissan 720 Z24I 1990 Nissan Axxess KA24E 1986-1994 Nissan D21 Z24I, VG30, KA24 1985-1994 Nissan Maxima VG30E 1992-1993 Nissan NX GA16DE, SR20DE Quote Link to comment Share on other sites More sharing options...
czny Posted September 12, 2018 Share Posted September 12, 2018 1 hour ago, ausubaru92 said: Just for a point of interest. the Subaru optical distributor uses a J912 Mitsubishi Crank Angle Sensor that is also found in these vehicles 1993-1998 Mercury Villager 3.0 1991-1994 Infiniti G20 SR20DE 1988-1990 Isuzu Trooper 2.6/2.8 1984-1986 Nissan S12 200SX CA18ET 1989-1990 Nissan S13 240SX KA24E 1981-1983 Nissan S130 280ZX Turbo 1984-1989 Nissan Z31 300ZX VG30/VG30T 1986 Nissan 720 Z24I 1990 Nissan Axxess KA24E 1986-1994 Nissan D21 Z24I, VG30, KA24 1985-1994 Nissan Maxima VG30E 1992-1993 Nissan NX GA16DE, SR20DE Noticed that that crank angle sensor had such a wide range of makes & models for application when I hunted for a replacement too. Standard Motor Products #LX-653. http://ecatalog.smpcorp.com/STD/#/vehicles Looks like in a pinch a good used one could be found. Quote Link to comment Share on other sites More sharing options...
Steptoe Posted September 13, 2018 Share Posted September 13, 2018 Just don't pull apart ( a good one) the way Steptoe did ! There was a lot of HTF going on Quote Link to comment Share on other sites More sharing options...
ausubaru92 Posted September 13, 2018 Share Posted September 13, 2018 Can I have it? I would like to do some testing on it Quote Link to comment Share on other sites More sharing options...
Steptoe Posted September 13, 2018 Share Posted September 13, 2018 Hmm, maybe...so long as you share...I had intended to see which pin is which wire...they is two clear LED there for the individual tracks of disc. Think it's four slots and 360 holes Quote Link to comment Share on other sites More sharing options...
ausubaru92 Posted September 13, 2018 Share Posted September 13, 2018 (edited) Infra red LEDs. can only see them shining when looking through phone camera (light purple colour) The LED's wont be connected to the output wires directly, they will feed the gate of a FET which will be connected to the output wires along with some circuitry for noise and error correction. If you remove it from the dizzy and post it to me, I'll power it up, test it and share the photos Edited September 13, 2018 by ausubaru92 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.