jono Posted November 16, 2018 Share Posted November 16, 2018 but it was tar and had just gone over a 20 KPH speed bump at about stop or 10 KPH, came and went, came and went within 200 metres just looked at wheels and tyres - look OK recent work has been shimming the caster bar to correct for the camber kit in the Brumby and today - well , this is BLISS The brake pedal squeak that returned after a decade or more on this pedal box, pulled pedal box apart to encase the brake pedal spring in rubber tube where its inside sat on the outside of the pedals tube and greased it all up - then adjusted brake light switch to activate it sooner than it had but as for this weird thing, felt as if I'd run over a thick slippery snake ?? Quote Link to comment Share on other sites More sharing options...
jono Posted November 16, 2018 Author Share Posted November 16, 2018 Wondering if the DOJs fell out then settled back in taking account of fact the camber kit allows up extra 14 mm each side .right be dreaming DOJ out ?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.