83subaruGLchick Posted February 17, 2019 Author Share Posted February 17, 2019 All the new/ cleaned up parts. Just waiting on EVEN MORE PARTS 1 Quote Link to comment Share on other sites More sharing options...
DaveAP Posted February 19, 2019 Share Posted February 19, 2019 Nice job on your rebuild. Even for a soob, that is alot of miles. 1 Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 Okay so much to update you guys on. So what I thought was a shocks, struts, tie rod(inner and outer) and ball joints job turned into a brake lines in the front, parking brake cable, rotors in the front, pads in the front, tie rods(inner and outer), ball joints, bearings, seals, shocks, struts, steering stabilizer bellows, passenger side cv axle and a lift kit job. Once I started tearing it all apart I realized all of that was either bad or close to needing replacement so I just am doing all of it at once figured why not right? Anyways so I’m in the middle of that and am currently waiting on the bearings and lift kit to come in to put it all together in the main time I’ve replaced almost everything else on that list, sanded down the fender wells and painted them, cut the front fenders, finished deleting the smog pump stuff, painted and sanded down the front end, finally repainted my rear spoiler and I think that’s it. Pics of all this progress to follow Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 After the fender trimming and front end clean up Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 After paint Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 Driver side Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 Before being put on the chopping block Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 Bringing the front skid plate bar back to life Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 And all cleaned up and painted Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 The new and improved front wheel wells lol I think I’m also going to do that shifter bushing upgrade I read about on this forum somewhere while I’m doing all this other stuff Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 The pretty newly painted rear spoiler Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted February 27, 2019 Author Share Posted February 27, 2019 What the rear looks like currently I’m gonna start tearing it apart next luckily I’m only doing shocks and painting and sanding back here. It should not take nearly as long as the front has.... Quote Link to comment Share on other sites More sharing options...
el_freddo Posted February 27, 2019 Share Posted February 27, 2019 You'll love the painted guards - so easy to clean out and they look schmick when they're clean too! Will you be doing the rest of the underside of the vehicle? Keep up the good work! Cheers Bennie Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted March 10, 2019 Author Share Posted March 10, 2019 (edited) On 2/27/2019 at 2:02 AM, el_freddo said: You'll love the painted guards - so easy to clean out and they look schmick when they're clean too! Will you be doing the rest of the underside of the vehicle? Keep up the good work! Cheers Bennie I’m slowly tackling almost everything. To be honest I don’t think I’ll do the whole undercarriage I just don’t have the resources for that. Edited March 10, 2019 by 83subaruGLchick Quote Link to comment Share on other sites More sharing options...
el_freddo Posted March 10, 2019 Share Posted March 10, 2019 26 minutes ago, 83subaruGLchick said: I’m slowly tackling almost everything. To be honest I don’t think I’ll do the whole undercarriage I just don’t have the resources for that. Yeah fair enough. I’ve done my firewall back down to the rear suspension including the wheel arches etc. I had everything out already - gearbox and the front end. Can’t remember why I had the front end out, gearbox was out for a rebuild so I did the paint work while I was there. Cheers Bennie Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted March 20, 2019 Author Share Posted March 20, 2019 Alright guys my lift kit came in over the weekend and I’m in the process of putting it in which is super exciting. The new rear shocks I have don’t fit the mounting holes are too small for the upper mount so I’m in the process of fixing that. Finally finished sanding/removing/painting most of the rust. She’s coming along! Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted March 20, 2019 Author Share Posted March 20, 2019 I’m also kind of starting to look around for a dash assembly for my car. It’s the dark blue I don’t NEED one but mine is pretty cracked so if I can find one I’d like to replace it. Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted March 20, 2019 Author Share Posted March 20, 2019 Here’s what the rear wheel wells looked like when I finally took the plastic trim off of them Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted March 20, 2019 Author Share Posted March 20, 2019 Here’s a progress picture of sanding down, hammering, and cutting out rust. 1 Quote Link to comment Share on other sites More sharing options...
el_freddo Posted March 21, 2019 Share Posted March 21, 2019 Keep up the good work! It’s looking awesome. I would be so shattered if I found this on my guards - I’m about to look under the windscreen rubber of my brumby and I’m expecting it to not be pretty under there On 2/27/2019 at 6:02 PM, 83subaruGLchick said: The pretty newly painted rear spoiler I missed this post - where did you get the spoiler from and do you have any pics of it fitted yet? Cheers Bennie Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted March 26, 2019 Author Share Posted March 26, 2019 On 3/21/2019 at 12:45 AM, el_freddo said: Keep up the good work! It’s looking awesome. I would be so shattered if I found this on my guards - I’m about to look under the windscreen rubber of my brumby and I’m expecting it to not be pretty under there I missed this post - where did you get the spoiler from and do you have any pics of it fitted yet? Cheers Bennie These spoilers to my understanding came stock on some model years, when I bought my car it had the mounting for one but it was removed. Luckily I was at Pick n Pull here locally one day and found a pretty destroyed GL that had this one on it! So I jumped on it. It also had the cyclops eye but every part was taken already I could only tell because the mounting bracket for the light was still there... 1 Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted March 27, 2019 Author Share Posted March 27, 2019 Old shocks VS. New shocks for the lift. I'm surprised how much bigger they are. The upper mounting holes didn't line up like they're supposed to so I'm in the process of drilling those out. UPDATE ON THE LIFT: It's in, just the rear shocks aren't because of the fitting issue, I'm gonna finish putting the front end back together this week/weekend hopefully so it should drive out of the garage by Sunday if all goes according to plan. Then I gotta start the engine swap.... which I still am about 1,000-1,500 out on which sucks especially since now my STI needs my money too 2 MONEY PITS IS NOT FUN! Quote Link to comment Share on other sites More sharing options...
83subaruGLchick Posted March 27, 2019 Author Share Posted March 27, 2019 The wheel wells are painted, and this is how she still sits soon little blue baby..soon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.