ontherun987 Posted August 18, 2019 Share Posted August 18, 2019 Does this look bent? This is what the other side looks like. It looks like the bushing is a little crunched up. Quote Link to comment Share on other sites More sharing options...
el_freddo Posted August 18, 2019 Share Posted August 18, 2019 It doesn’t look right. And it’s missing a plate in there so you’ve got a weak point at the bottom side of that lift block. Mine is a bit different, but the same principal applies - mine uses the standard plate in its original position, where as yours has it on a tower, giving it more leverage on the bolts. Add a second stock bracing plate where the K frame meets the lift block and I reckon you’ll strengthen this section up good and proper. Cheers Bennie Quote Link to comment Share on other sites More sharing options...
carfreak85 Posted August 20, 2019 Share Posted August 20, 2019 Remove the lift block and measure it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.