fuji4x4 Posted October 15, 2019 Share Posted October 15, 2019 I've an extra set of spoked GL wheels that I've been wanting to restore. Started grinding rust off but once I had tires removed the bead seat area seems to be far too gone. Quote Link to comment Share on other sites More sharing options...
fuji4x4 Posted October 15, 2019 Author Share Posted October 15, 2019 Started grinding at the worst part and although it did smooth it out idk if it's going to take those chunks off. What do you think? Are they too far gone? And how smooth does this area need to be? Quote Link to comment Share on other sites More sharing options...
Numbchux Posted October 15, 2019 Share Posted October 15, 2019 You are going to have a hell of a time getting those to hold air. Shouldn't be hard to find another set to work on. 1 Quote Link to comment Share on other sites More sharing options...
DaveT Posted October 15, 2019 Share Posted October 15, 2019 I still see a few big rust flakes in the bottom picture. Tap them with a cold chisel and hammer. I don't think I would bother with those rims. Quote Link to comment Share on other sites More sharing options...
moosens Posted October 16, 2019 Share Posted October 16, 2019 Bail out and start saving some spare change for a set from another enthusiast. Quote Link to comment Share on other sites More sharing options...
moosens Posted October 16, 2019 Share Posted October 16, 2019 Maybe select the best one and have that as a spare just so you feel good about trying to salvage those beads. As mentioned , might not hold air if they all look as bad. Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.