kmpdx Posted August 9, 2020 Share Posted August 9, 2020 Hey guys. Just rebuilt my dash clock using a much more reliable 2001(?) Toyota Corolla clock. Going to post photos if anyone is interested. Probably won't actually install it for a while still. 1 Quote Link to comment Share on other sites More sharing options...
el_freddo Posted August 9, 2020 Share Posted August 9, 2020 Nice. When mine gave up I resoldered several of the factory solder joints and it’s good as gold. Pulling it out and refitting it took longer than the fix once the iron was hot! Cheers Bennie 1 Quote Link to comment Share on other sites More sharing options...
kmpdx Posted August 9, 2020 Author Share Posted August 9, 2020 I tried that first. I could see that 5 or 6 of the points were bad. When I connected it to 12v, it would only light up when two of the buttons were pushed and would not retain the time. Had a couple of goes at it and could not get it to work. To make matters worse, the battery wire on the factory harness doesn't have power. The acc and illumination work. I will be wiring this one to the stereo area when I get the ol' Loyale fired back up in another month or so. 1 Quote Link to comment Share on other sites More sharing options...
somick Posted August 9, 2020 Share Posted August 9, 2020 I searched Amazon for 2001 Corolla clock and got nothing. Where did you buy them? Quote Link to comment Share on other sites More sharing options...
kmpdx Posted August 9, 2020 Author Share Posted August 9, 2020 (edited) I pulled it from the junk yard. They are definitely available on eBay and should be pretty cheap. One step I did not show is that I needed to saw off the harness connector on the back of the Corolla clock. Here is one: https://www.ebay.com/itm/98-99-00-01-02-TOYOTA-COROLLA-PRIZM-83910-02040-DASH-DIGITAL-TIME-CLOCK-G-12/152623201345?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D228411%26meid%3Df6268f2018594e79816d7dbe96445fc9%26pid%3D100005%26rk%3D1%26rkt%3D12%26mehot%3Dco%26sd%3D174305935983%26itm%3D152623201345%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithDarwoV3BBEV2b%26brand%3DToyota&_trksid=p2047675.c100005.m1851 They are a good size for this project and a pretty square which makes it easier to modify the hole that needs to be cut. I will look next time I am at the junk yard, too. Just FYI, I basically cut a hole in the face of the original clock body and glued the Corolla clock inside that body. I had more photos to show the process but the forum limits photo total to 2mb. Pretty sure if you own one of these you are probably pretty used to finagling with stuff, lol. Edited August 9, 2020 by kmpdx add better info Quote Link to comment Share on other sites More sharing options...
Step-a-toe Posted August 9, 2020 Share Posted August 9, 2020 Nice presentation of your adaptation. I went through three or four and gave Up. Mounted my 0-5V gauge instead to monitor knock sensor, only for the sun to buckle it's screen 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.