libertyherb123 Posted January 3, 2021 Share Posted January 3, 2021 (edited) Hey everyone. I recently replaced my reverse light switch and while I have the transmission fluid out I thought I would check that my neutral switch is working. Is there an easy way to check if it is working? Does it matter if it isn't working? Or does it send inputs to the ECU in neutral? Edited January 3, 2021 by libertyherb123 Quote Link to comment Share on other sites More sharing options...
lmdew Posted January 3, 2021 Share Posted January 3, 2021 You can hook up a multimeter to the connector. It's either OL - Open or 0.0 - Closed for ohms. Yes it does input to the ECU, slight impact on idle RPM. The two connectors are right on the back of the engine as they come up from the trans. Little 2 pin connector. Gray and Brown if my memory is correct. One for Reverse and the other Neutral. Quote Link to comment Share on other sites More sharing options...
ocei77 Posted January 4, 2021 Share Posted January 4, 2021 The brown is the neutral position switch. Separate at the top of the tranny the resistance of the switch should be more than 1Mohm. O. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.