Otterby Posted January 11, 2021 Share Posted January 11, 2021 (edited) I’m assembling my EA71 and went to put the pistons in but got confused. I’ve always been taught to put the marking on the piston orientated up. These pistons are from ETI and have the marking 0.75 stamped into them. However if I put the 0.75 at the top it is upside down? This just seems odd. Should it go upside down on top or right side up on the bottom? Or does it even matter? Edited January 11, 2021 by Otterby Quote Link to comment Share on other sites More sharing options...
George1943 Posted January 11, 2021 Share Posted January 11, 2021 Here is a page from my Haynes manual. 1 Quote Link to comment Share on other sites More sharing options...
Otterby Posted January 12, 2021 Author Share Posted January 12, 2021 Thanks George! That answers my question. I would have never guessed that the number will be at the bottom and right side up on cylinders 1 and 4 and will be at the top and upside down on cylinders 2 and 3. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.