Pure_bigpapi1 Posted October 20, 2021 Share Posted October 20, 2021 Hey guys my brother has a 1999 Subaru Impreza gc8 wrx I'm wanting to take his gearbox and wanting to know if it'll fit into my 2003 subaru Forester 2.5x na Quote Link to comment Share on other sites More sharing options...
heartless Posted October 20, 2021 Share Posted October 20, 2021 (edited) not sure if it will work or not, but you do need to be concerned about final drive ratios.. they MUST match between tranny and rear end. Edited October 20, 2021 by heartless cant spell today.. =P 2 Quote Link to comment Share on other sites More sharing options...
wtdash Posted October 20, 2021 Share Posted October 20, 2021 http://www.gearhack.com/myink/ViewPage.php?file=docs/Subaru Transmission Chart Quote Link to comment Share on other sites More sharing options...
Numbchux Posted October 20, 2021 Share Posted October 20, 2021 Anything is possible. Rear diff is almost certainly a different ratio, so that'll have to be swapped as well. Not ideal ratios for non-turbo and tall tires. ASSuming the Forester is already a 5-speed. It will likely be a pull-style clutch, where the WRX will be push-style. They should both be hydraulic, so you'll just use the WRX flywheel/clutch/slave cylinder. I *think* a 99 aussie car will be phase 2, 8 bolt bellhousing. It's possible it's a phase 1, with 4-bolt bellhousing, in which case you'll be missing the lower starter bolt. There are about 6 ways to deal with this, documented thousands of times on the internet. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted October 20, 2021 Share Posted October 20, 2021 WRX is pull clutch, and the Forester is push clutch. But yes it can work. Must have matching rear diff or the same final drive. Most WRX's are 3.9 and the Forester is almost certainly 4.11 GD Quote Link to comment Share on other sites More sharing options...
el_freddo Posted October 22, 2021 Share Posted October 22, 2021 It’ll bolt in no worries and will be physically the same in fitment. You’ll lose your dual range feature as the WRX box won’t have this. You might find a difference in the front diff setup - impreza might still have the diff stubs, your 2003 forester will surely have the male stub axles. I don’t know if the impreza driveshafts will swap into the later model forester. You might find the gear ratios sluggish to work with the large tyres and the difference in revs between each gear will be different too. If the impreza box is a four bolt (stud on the lower starter motor mount is the easiest way to identify), it’ll be in the weaker phase 1 front case, but it could be a phase 2 eight bolt gearbox which is what your SG would have anyway. Cheers Bennie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.