Jump to content
Ultimate Subaru Message Board

Engine coolant loss, steam under hood, most likely culprit?


mkoch
 Share

Recommended Posts

The intake manifold has a coolant passage, along with the path for the intake.

The gaskets between the heads and the intake can fail, one way puts the coolant on top of the engine, the other, it gets sucked into the cylinders and burned.  Get the intake gaskets from a Subaru dealer.  The aftermarket ones are no where near as good.

Link to comment
Share on other sites

On 2/17/2022 at 6:44 PM, DaveT said:

The intake manifold has a coolant passage, along with the path for the intake.

The gaskets between the heads and the intake can fail, one way puts the coolant on top of the engine, the other, it gets sucked into the cylinders and burned.  Get the intake gaskets from a Subaru dealer.  The aftermarket ones are no where near as good.

In addition to the gaskets, I applied some grey silicon to each side of them.  So far, so good.  With a beast this old and unknown, I did that to the intake manifold gaskets, water pump gasket, and thermostat housing gasket in addition to greasing up the mounting bolts to prevent oxidation and fusing to the intake again.  Hopefully it's just overkill and not a future problem. 

+1 to pressure checking the system, make sure it's not the head gasket leaking coolant on top of the engine.

Good luck.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...