stngllhm Posted October 19, 2004 Share Posted October 19, 2004 the spider intake manfold i got had been run on an 85 rx and the injectors look like the ones shown in this thread http://ultimatesubaru.org/forum/showthread.php?t=23317 well the car was running like C**P so i decided to try the injectors off my old intake and when i took them out they where totally diffrent they fit fine and pluged in but there was no pintal showing. the car does run a lot better now. what i was wondering sshould my injectors from my 87 gl-10 turbo look like the ones in that picture I"ll try to get pic of my injectors tommrow Quote Link to comment Share on other sites More sharing options...
calebz Posted October 19, 2004 Share Posted October 19, 2004 Thats what my 87 and 88 injectors look like..(the ones with the restrictor cap still attached) Quote Link to comment Share on other sites More sharing options...
WJM Posted October 19, 2004 Share Posted October 19, 2004 ALL injectors for the EA82 MPFI/TURBO should look like the one on the right. The one on the left is an experimentation. Quote Link to comment Share on other sites More sharing options...
stngllhm Posted October 19, 2004 Author Share Posted October 19, 2004 here are the pictures of my injectors can any one tell me what they are out of if they are not the stock ones i found these #'s on them d1630ba fj15 1734 Quote Link to comment Share on other sites More sharing options...
WJM Posted October 19, 2004 Share Posted October 19, 2004 here are the pictures of my injectors can any one tell me what they are out of if they are not the stock ones i found these #'s on them d1630ba fj15 1734 Those are NOT stock for sure. Should send one of those off to RC ENg. and see what those flow at...someone might have at one point had engine management with those injectors and htey might be HUGE ones as compared ot stock....??? Quote Link to comment Share on other sites More sharing options...
stngllhm Posted October 19, 2004 Author Share Posted October 19, 2004 Those are NOT stock for sure.all i can say is they where in the car when i bought it and they work a lot better than the ones that where in my spider intake when i got iti just want to know what they are from if i send them off that means i will have to swap the old injectors back in and these work alot better plus i'm broke Quote Link to comment Share on other sites More sharing options...
oddcomp Posted October 19, 2004 Share Posted October 19, 2004 hmm.. i would back track the injector wiring harness.. and se if it leads to anywhere besides under the dash ... i can't imagine a stock ecu being able to "handle" those injectors correctly and i should know Quote Link to comment Share on other sites More sharing options...
stngllhm Posted October 19, 2004 Author Share Posted October 19, 2004 its all stock wiring Quote Link to comment Share on other sites More sharing options...
oddcomp Posted October 20, 2004 Share Posted October 20, 2004 hmm they don't look like my spider intake injectors.. iw ill double check but pretty sure they do't look like that Quote Link to comment Share on other sites More sharing options...
oddcomp Posted October 20, 2004 Share Posted October 20, 2004 btw.. the fj15 number you posted.. a search comes back to a porsche 928 v8 injector... yes v8 all the other numbers don't get a useful hit got some side pics of the whole injector? Quote Link to comment Share on other sites More sharing options...
stngllhm Posted October 20, 2004 Author Share Posted October 20, 2004 no i don't have any and i don't really want to pull it again right now but the side shot looks basically like a standard subaru injector as soon as i get some money i will take them out and have napa clean and test and i will take one of the standard injectors in too so i can get a comparision but that is a little ways away sence i just started a new job Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.