Jump to content
Ultimate Subaru Message Board
Sign in to follow this  
TotallyCorupt

ea82 to ea82t conversion???

Recommended Posts

i was talking to my buddy who is pretty suby swavy and he said that its alot of work to do the swap from an EA82 to the EA82 turbo motor. he said you have to do the hole wiring harness and all that stuff, well i dont know if he said all that but...i just want to check this out and make sure that its is.

 

Thanks,

 

Mike

Share this post


Link to post
Share on other sites

well here's the list..i HIGHLY suggest not doing it...

 

Motor

 

COMPLETE engine and dash harness + cpu...don't even try it with a digi gauge turbo

 

fuel pump

 

PS hardlines( yes the power steering lines are different between turbo and NA)

 

cross member

 

and alot of asprin!!!

Share this post


Link to post
Share on other sites

well as far as electronics go.. you could go the do it yersel route and use a meagquirt for the fuel and ignition

but you still have teh crossmembers and such to argue with

Share this post


Link to post
Share on other sites

think the wiring is pretty easy, you just have it as a stand alone part. all you have to do is power it, ground it, have it controll a relay for the fuel pump, and hookup the trigger wires on the coil, and connect a wire from the computer to the starter solenoid wire. then the rest plugs in like stock to the engine/intake.

thats on the flapper system, i think the hotwiere would be easier, as you wouldnt have to run the trigger wire to the coil.

 

dash and everything plugs in using your stock wiring from the car, even if its an ea81. i love it! it all fits!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×