91 loyale in Syr Posted January 6, 2005 Share Posted January 6, 2005 Hi everyone-Over the last couple weeks Ive noticed that when i use the intermittent wipers they seem to "hesitate" at the beginning of the cycle. They'll climb an inch or so- pause for a second or 2, than continue on their way. Sometimes it will happen twice in the beginning of each cycle. It doesnt happen every time. It doesnt happen at any other wiper speed, they all work fine though they seem to be a little slower than they used to be. Any ideas would be greatly appreciated..... Quote Link to comment Share on other sites More sharing options...
travis Posted January 6, 2005 Share Posted January 6, 2005 My 92 is doing the exact same thing all of a sudden, I am very interested to hear some replys. I just assumed it was a bad switch.....but maybe ???? Quote Link to comment Share on other sites More sharing options...
Skip Posted January 6, 2005 Share Posted January 6, 2005 wipers doing the "herky jerk" very common problem on our vintage Roo's A search for "intermittent wiper problems" might find some of the old posts. but as I remember There are several contributing problems. 1) The timer module PCB solder connections - most common. Some have resoldered them or a boneyard model may work - (it is mounted on the trim panel that is above you knees when driving.) 2) A corroded ground connection at the wiper motor. (under one of the three wiper gear box cover screws) 3) The park position swiper arm contact (inside the wiper gear box cover) Good luck, a lot of us have this suffered this problem at one time or another. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.