Tom63050 Posted January 9, 2005 Share Posted January 9, 2005 I'd like to know this so that when I look at ads I can tell if the car has one. I really want one for my lifted Loyale and am willing to buy a whole car to get one, especially if it is a fuel-injected 86 or newer wagon. Then I can use the D/R 5-speed and have a spare motor too, plus all the little nickel-and-dime stuff. Basically my own compact junkyard. Quote Link to comment Share on other sites More sharing options...
idosubaru Posted January 9, 2005 Share Posted January 9, 2005 try doing a search, you'll get tons of commentary on this subject. easiest to get a 3.7 lsd and convert your existing open 3.9 using the internals of the 3.7. i believe there's information and a write up addressing this. do a search on this group and you'll have plenty to read for quite some time, with lots of lists of vehicles... Quote Link to comment Share on other sites More sharing options...
GLCraig Posted January 9, 2005 Share Posted January 9, 2005 The parts books say that a 3.9 LSD was an option on the XT6 but no one on the board has actually seen one. All of the other LSDs will have a 3.7 ratio. Here's what's involved to take a 3.9 and making it an LSD using 3.7 LSD parts. http://www.ultimatesubaru.org/forum/article.php?a=36 Quote Link to comment Share on other sites More sharing options...
Dr. RX Posted January 9, 2005 Share Posted January 9, 2005 The parts books say that a 3.9 LSD was an option on the XT6 but no one on the board has actually seen one. All of the other LSDs will have a 3.7 ratio. Here's what's involved to take a 3.9 and making it an LSD using 3.7 LSD parts. http://www.ultimatesubaru.org/forum/article.php?a=36 Correction, the parts page at Liberty Subaru states that, my Subaru Parts Book only shows that parts as a LSD rear diff, it doesn't give the ratio. I sent Liberty an e-mail asking them to verify that part number as being a 3.90 ratio. I'm not surprized that they haven't answered. Quote Link to comment Share on other sites More sharing options...
ezapar Posted January 9, 2005 Share Posted January 9, 2005 The parts books say that a 3.9 LSD was an option on the XT6 but no one on the board has actually seen one. I've seen one. It was on/in a XT6 on it's way into Aaron's Auto Wrecking. Couple years ago. Quote Link to comment Share on other sites More sharing options...
idosubaru Posted January 9, 2005 Share Posted January 9, 2005 best bet is to build one from a 3.7 lsd unit and an open 3.9. keep your eye on ebay as well, but they'll go for 300+ and i've seen 2 in the past 2 years. you will likely wait a long time before you see one on there though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.