jsclark Posted January 27, 2005 Share Posted January 27, 2005 I am the owner of an '91 loyale 4x4 and got energetic and did the oil change thing. Went to grease and can't find any grease points and grease is needed. Is this something I can do at home. Haynes manual shows nothing. Thanks!! Quote Link to comment Share on other sites More sharing options...
Ross Posted January 27, 2005 Share Posted January 27, 2005 OEM ball joints, universals etc. dont have grease nipples, as you noticed. If the get sloppy, they just have to be replaced. Some aftermarket joints are available with grease nipples. Luckily there arn't too many ball joints etc on these cars anyway! Quote Link to comment Share on other sites More sharing options...
subyrally Posted January 27, 2005 Share Posted January 27, 2005 good ole non servicable parts. Quote Link to comment Share on other sites More sharing options...
85Sub4WD Posted January 27, 2005 Share Posted January 27, 2005 There are no "grease" points. If it squeaks/bumps/grinds replace it. However, you won't have to do that often. However it is wise to lube the door hinges and mechanism. I think you will see where some white grease should go without any problem, but other than that, enjoy! Quote Link to comment Share on other sites More sharing options...
Ross Posted January 27, 2005 Share Posted January 27, 2005 Haynes manual shows nothing. Its good like that isn't it? I have one too, and the most frustrating thing i find is when it says "take the part to a dealer to be checked.....":banghead: Quote Link to comment Share on other sites More sharing options...
jsclark Posted January 27, 2005 Author Share Posted January 27, 2005 Thanks for the info! Quote Link to comment Share on other sites More sharing options...
Martin Posted January 27, 2005 Share Posted January 27, 2005 Thanks for the info! What part of the island are you from? There are a few guys on here from the island. Quote Link to comment Share on other sites More sharing options...
northguy Posted January 27, 2005 Share Posted January 27, 2005 And, welcome to the board. Quote Link to comment Share on other sites More sharing options...
calebz Posted January 27, 2005 Share Posted January 27, 2005 And, welcome to the board. Have you considered a job as a greeter at walmart or something? I'll bet you would be good at it Quote Link to comment Share on other sites More sharing options...
northguy Posted January 27, 2005 Share Posted January 27, 2005 It's probably a more respected position than my current one. Quote Link to comment Share on other sites More sharing options...
calebz Posted January 27, 2005 Share Posted January 27, 2005 Nah.. its probably one of the only jobs thats lower on the food chain than yours.. well.. except maybe mine. Quote Link to comment Share on other sites More sharing options...
jsclark Posted February 1, 2005 Author Share Posted February 1, 2005 Thanks for the good wishes and replies...I live in Shawnigan Lake. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.