bushbasher Posted February 12, 2005 Share Posted February 12, 2005 Im looking for pictures to help me model the engine/tranny setup in Solidworks3d so I can start designing a midengine 4wd subaru buggy. I took some measurements of my engine/tranny in-car but dont have a great idea what it all looks like cause its covered in sheetmetal and vacuum hoses. I've drawn up a subaru tranny but the more I look at it the more incorrect it looks. Im interested in side profile, top view, bottom, front, anything that is at a fairly straight angle. Thanks! Quote Link to comment Share on other sites More sharing options...
Turbone Posted February 12, 2005 Share Posted February 12, 2005 So what your saying is, you want pics of the engine and tranny outside of the car? Quote Link to comment Share on other sites More sharing options...
bushbasher Posted February 12, 2005 Author Share Posted February 12, 2005 yep, should have clarified that. Sorry. this is what I've done so far, and whats here will probably be different in the end, its already gone through a few different designs. Quote Link to comment Share on other sites More sharing options...
MilesFox Posted February 13, 2005 Share Posted February 13, 2005 www.warpthree.com/milesfox/87rx/rxbuild there are a few pics of an ea82 turbo in carious stages of head gasket and reseal, block, block with intake, block with intake and turbo. and pics of the individual parts themselves Quote Link to comment Share on other sites More sharing options...
Tycho Posted February 13, 2005 Share Posted February 13, 2005 http://www.themacaddress.com/news.php?nid=58215400 EA82 SPFI. Quote Link to comment Share on other sites More sharing options...
bushbasher Posted February 13, 2005 Author Share Posted February 13, 2005 awesome guys, thats exactly the kinda stuff I need! I'll show you guys what I come up with:brow: Quote Link to comment Share on other sites More sharing options...
bushbasher Posted February 13, 2005 Author Share Posted February 13, 2005 heres a pic of progress. Note the chain drive and shaft, and the new more accurate motor (the tranny is still really innacurate, still need pics of a 5spd 4wd tranny) Quote Link to comment Share on other sites More sharing options...
scrapdaddytatum Posted February 13, 2005 Share Posted February 13, 2005 i got a 5mt 4wd in the attic, what measurments do you want Quote Link to comment Share on other sites More sharing options...
bushbasher Posted February 14, 2005 Author Share Posted February 14, 2005 Measurements are not really a problem, pictures is what I'm after cause my tranny is in-car and though I have all the major measurements, the thing isnt exactly all straight lines. I need something to look at while I model it. Think you could take a side profile pic? Quote Link to comment Share on other sites More sharing options...
scrapdaddytatum Posted February 14, 2005 Share Posted February 14, 2005 ill see what i can do, check back in a couple of hours Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.