fastenova Posted May 11, 2005 Share Posted May 11, 2005 Looking to figure out whether new Subie seats (99 OB) will fit in an ea wagon. Height-wise, and mounting-wise... Quote Link to comment Share on other sites More sharing options...
ShawnW Posted May 11, 2005 Share Posted May 11, 2005 no and no, not without modification but it has been done by welding some brackets onto the 82 wagon seats and not using the seat sliders from the new seats. Quote Link to comment Share on other sites More sharing options...
SuBrat84 Posted May 11, 2005 Share Posted May 11, 2005 I fabbed up a GL - 10 seat with height adjustment to fit onto my 84 Brat sliders.. the GL-10 was a little wider.. so it took an extra couple brackets to get it to mount up right.. The newer seats are probably wider than for your wagon... so you might want to take some measurements to see if you have room. If you got a welder and an oxycetalene torch though you can do just about anything!Good luck! Quote Link to comment Share on other sites More sharing options...
fastenova Posted May 12, 2005 Author Share Posted May 12, 2005 Sweet. I have no qualms about melting metal to make it fit =D The seats on my '82 are thrashed, and I am getting a set of 99 OB seats for free, so I figure why not? My dad's got gas, wirefeed, and arc welders, and usually has some scrap metal sitting around, so I'll bet we can make something work. The width definately might be a consideration, but I guess we'll see how it goes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.