Swany Posted July 12, 2005 Share Posted July 12, 2005 I Have A 93 Legacy Wagon With No Tail Lights. My Tail Lights & Front Side Marker Lights Will Not Stay On. I Can Install A New Fuse And They Will Stay On For A Short Time. Once I Start Driving The Fuse Blows. I Tried Following The Wiring From Tail Lights & License Plate Light To Front And Could Not See Any Visible Problems. Does Anyone Have Any Advice On What May Be The Problem??? Thanks, Swany Quote Link to comment Share on other sites More sharing options...
Subi81 Posted July 12, 2005 Share Posted July 12, 2005 you might want to try posting this message in the New Generation forum, that is where all the Legacy people hang out, http://www.ultimatesubaru.org/forum/forumdisplay.php?f=3 Quote Link to comment Share on other sites More sharing options...
Cougar Posted July 12, 2005 Share Posted July 12, 2005 It seems there is a low resistance to ground somewhere on the line. The problem is, where? If there is any kind of wiring additions or changes to the lighting I would check that first. You may be able to see which leg the fault is by replacing the fuse with a brake light. The light will be in series so it will limit the current to a safe level. Check the running lights and see if you can find one that is dimmer than the other like it. If there is one, then check the wiring on that leg. It will be dimmmer due to the fault near it. Quote Link to comment Share on other sites More sharing options...
Andyjo Posted July 12, 2005 Share Posted July 12, 2005 could be a short to one of the lights, get a voltmeter & check the to see if all the connections are good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.