jmlaser Posted July 21, 2005 Share Posted July 21, 2005 I replaced my front wheel bearings and halfshafts about 2 months ago on my 98 Legacy GT. I had serious probelms with the passenger side ( halfshaft stuck in the bearing and rough to press out the bearings also ). I am pretty sure it did some damage to the spindle at that time ( the metal showed some small stress cracks but only on the outer portions of the spindle ). It all went back together well enough and turned freely with no noises. I drive ALOT and now I am starting to get noises/ vibrations that seem to be wheel bearing related (arrgghh!) reeeet reeet reeeet. I guess my questions is this- Is the spindle the same on a Legacy L as it is on the GT's? I know it will be alot easier to find an L spindle than a GT if they are different,. Is the difference just the suspension setup? Thanks for any clues. 86K on 98' Legacy GT Std Tranny. Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted July 21, 2005 Share Posted July 21, 2005 Yeah the spindles should be the same. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.