Jump to content
Ultimate Subaru Message Board

ea82 mpfi port dimensions


Recommended Posts

I was wondering if anyone has the dimensions for the diameters and spacings of the ea82 mpfi (ie 2 inlet ports/head) inlet ports?

 

The spacings are the most important, but the diameters would be helpfull too.

 

Cheers :)

Link to comment
Share on other sites

thanks! that will help with the port diameters, i didnt think of that.... :)

 

as for the spacing, i was a bit ambiguous with my english there, i meant the center spacing between two individual ports on one head - or is it just one gasket per head?

 

Sorry for the painfull questions - I am gathering information for a possible mod, and i dont have access to a mpfi head to measure.

 

Cheers

Link to comment
Share on other sites

Ahh! You haven't dealt with the MPFI head/intake-gasket at all. English is fine, my assumption was off.

 

The gasket is a single gasket that deals with both intake ports and the water passage. I can scan a gasket for you if you would like, but for anything to do with fabbing intake parts, you would be better off with the gasket.

Link to comment
Share on other sites

If you could scan it in, that would be awesome!!!

I assume both are identical, can you lay a ruler besides it/them when you scan them, so i can scale if necessary at my end?

I will private msg you my email.

Thankyou very much for the assistance.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...