Zefy Posted August 14, 2005 Share Posted August 14, 2005 ok so the previous owner of my brat did a horrible job making the jump seats removable... and since people actually use them i think there should be more then 2 bolts holding the darn things in... so i need to know some stuff... i have been looking at pics of the way the jump seats were installed from factory... the tabs welded to the seat bracket then the tabs welded to the bed... but the jump seats aren't laying right on the bed... the tabs hold it up... so i just want the measurement of that distance... i am trying my hardest to make the legal... and that means completely factory... i will most likely beaf up the thickness of the tabs but that is an improvement... so i can't see the vihicle inspection people disliking it... thanks everyone... Quote Link to comment Share on other sites More sharing options...
Zefy Posted August 16, 2005 Author Share Posted August 16, 2005 Bumpidy Quote Link to comment Share on other sites More sharing options...
Zefy Posted August 22, 2005 Author Share Posted August 22, 2005 Heeeeeeeeyyyyyyyyy!!!!bumpy Bump!!! Quote Link to comment Share on other sites More sharing options...
wagonpowaa Posted August 25, 2005 Share Posted August 25, 2005 I can give you a measurment, but you're gonna have to clarify exactly what the heck you want me to measure. got a picture? Quote Link to comment Share on other sites More sharing options...
Zefy Posted August 26, 2005 Author Share Posted August 26, 2005 thanks for your help... i need to know how far away from the back wall the seat bracket sits... now on the seat bracket there should be 4 tabs... and those tabs are what is welded to the bed... now i have the tabs still on the bracket but they were ground down on the bed... i would like to know how far away that tab is from the backwall... those tabs should also be holding the bracket just above the bed... this measurement isn't to important... but just for a factory look i'd like to get it close... sorry i don't have a pic... i hope i discribed it good enough... thanks again! Quote Link to comment Share on other sites More sharing options...
northguy Posted August 26, 2005 Share Posted August 26, 2005 Do you have the factory head rests also? If not, I've got an extra set. Quote Link to comment Share on other sites More sharing options...
Zefy Posted August 26, 2005 Author Share Posted August 26, 2005 northguy Do you have the factory head rests also? If not, I've got an extra set. yes i do have headrests, but thanks for the offer! Quote Link to comment Share on other sites More sharing options...
NorthWet Posted August 26, 2005 Share Posted August 26, 2005 26cm (10.25 inches) as measured on my "new" 79. This is from front edge of front-most bracket to the base of the vertical backwall. Quote Link to comment Share on other sites More sharing options...
RenaissanceMan Posted September 1, 2005 Share Posted September 1, 2005 Greg, just eyeball it like you saw on mine. -Mike Quote Link to comment Share on other sites More sharing options...
Zefy Posted September 1, 2005 Author Share Posted September 1, 2005 thanks northwet... now all i need is money to get it welded... i can do all the prep work myself but i don't have a welder... and Mike... eye-balling is for chumps!!! heh... chump! nah your no chump... so where are you now? back in cali? Quote Link to comment Share on other sites More sharing options...
RenaissanceMan Posted September 2, 2005 Share Posted September 2, 2005 thanks northwet... now all i need is money to get it welded... i can do all the prep work myself but i don't have a welder... and Mike... eye-balling is for chumps!!! heh... chump! nah your no chump... so where are you now? back in cali? Funny I have been called a lot of things in my life. Chump is a new one for me. So anyway, ya I am back down in Atascadero, CA. Wreaking havoc on the locals and driving my justy like I stole it. My 78 brat needs a radiator which I have been waiting for because I blew up the old one out on the dunes. The important part is that it drove off the beach.. Didnt get stuck or nuthin like the rednecks that come here and break their trucks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.