eddygordouk Posted October 30, 2006 Share Posted October 30, 2006 anyone have a simple stepthrough or any hints? Ive got all the other parts of the kit off except the front part. Ive been looking at my Chiltons manual for help around the bumper but its no use. When im under the car it appears the front lip is on pretty good and I dont know really a good way in getting it off. Thus ive broken down and asked haha Quote Link to comment Share on other sites More sharing options...
idosubaru Posted October 30, 2006 Share Posted October 30, 2006 i'm confused on what the problem could be, i removed one this summer from an RX and don't recall any issues except RUSTED bolts...grrrr... should only be bolts and clips right? look real close...start at one end and start pulling on it. if it's not bolted down it'll come loose, work your way around the corner and you'll feel it get tight and that's where a bolt or clip is. unbolt or slide clip around....sorry i can't be more help. Quote Link to comment Share on other sites More sharing options...
eddygordouk Posted October 30, 2006 Author Share Posted October 30, 2006 hmm weird, ill have to check again. when i was doing it it felt like it was on hard and bolted a number of times at differnt parts. ill have to check again though. see if anyone else might have experience with it Quote Link to comment Share on other sites More sharing options...
kingbobdole Posted October 30, 2006 Share Posted October 30, 2006 IIRC is just under the front and inside the fenders. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.