Jump to content
Ultimate Subaru Message Board

Toyota questions...


[HTi]Johnson
 Share

Recommended Posts

I know nothing about toyotas...do they have rear ends where the ratio is 3.9?

 

You gotta be a bit more specific. I know 1973 Toyota Corollas with a 1.6L engine had 3.90 gears in the back, the ones with the 1.2L engine had 4.10 gears.

When you go to the dealer to do your research, you will find, that there are so many different Toyota rear axles, with different ratios that your head will spin.

Link to comment
Share on other sites

I know nothing about toyotas...do they have rear ends where the ratio is 3.9?

You gotta be a bit more specific. I know 1973 Toyota Corollas with a 1.6L engine had 3.90 gears in the back, the ones with the 1.2L engine had 4.10 gears.

When you go to the dealer to do your research, you will find, that there are so many different Toyota rear axles, with different ratios that your head will spin.

 

Exactly what I meant. (Knowing nothing about Toyotas)

I want a solid axle with 3.9 ratio.

Link to comment
Share on other sites

the majority of the truck axles come stock with 4.10 diffs. if you swap a legacy diff up front and a transfercase in, you could use the stock truck axles.

 

as for the toyota rear diffs from the trucks, all you need to know.... it appears 8" diffs come in 4.10 and up, 7.5" toy diffs came in 3.9. options with an 8" rear diff are innumerable, i'm not sure about lockers and such for the 7.5" diff

info from the http://www.pirate4x4.com/forum toyota FAQ... don't bother asking any questions over there unless you have thick skin...

 

 

Toyota Rear Axle Widths:

55" wide, '79-85 4wd trucks/4runners - 6 Lug

58" wide, '86-95 4wd trucks/4runners - 6 Lug

56" wide, '79-95 2wd Trucks - 5 Lug

60.75" wide, '95.5-up Tacomas/4runners

66.75" wide, '93-98 T100 trucks

 

Differentials – Gearing

 

Gearing..... with a 4 banger and single case

stock 4.10= 31 or smaller tire

4.88=33 inch tire

5.29= 35 to 38 inch tire.

5.71= NOT RECOMMENDED FOR REAL OFFROAD USE

 

Originally posted by DSI

----------------------------------------------------

83-older 4.11 diff's are 37/9 and are 8in 4cyl style diff's, in 84 they switched th the 41/10 ratio, any time you have more teeth to a pinion the stronger the diff will be, reason being: more tooth contact/more teeth contacting the ring gear at one time.

This is the same reason 5.71's are very weak, 6 teeth, 5.29's have 7, 4.88's and 4.38's have 8, 4.56's have 9 and 411's have 9, 410's have 10, and 390's have 10

----------------------------------------------------

 

Originally posted by TNToy

----------------------------------------------------

If you have the axle code of your vehicle, it is easy to find out what size differential, what ratio, and what pinion set-up you have. This will also help if you are hunting for a particular unit off another vehicle. The axle code is in the vehicle ID plate under the hood or drivers door. The axle code is 4 digits: a letter followed by 3 numbers.

 

Example: G292 = 8.0" 4.10 final ratio 2 pinion

Code:

 

1ST R&P SIZE 2nd/3rd R&P RATIO 4th DIGIT PINION SET-UP

F = 7.5" 07 = 3.900 2 = 2 pinion

G = 8.0" 08 = 4.110 3 = 2 pinion LSD

10 = 4.375 4 = 4 pinion

14 = 4.875 5 = 4 pinion LSD

25 = 4.556

28 = 4.300

29 = 4.100

31 = 3.91

38 = 3.42

43 = 3.56

54 = 3.90

66 = 3.07

.

.

 

Code:

 

Ratio Ring/Pinion Color Crawl:Ratio

3.42 ...42/12... Purple ...31:1

3.90 ...39/10... Red... ...36:1

4.10 ...41/10... Pink.. ...37:1

4.11 ...37/09... Orange ...37:1

4.30 ...43/10... Blue.. ...39:1

4.37 ...35/08... Green. ...40:1

4.56 ...41/09... Yellow ...41:1

4.88 ...39/08... White. ...44:1

5.29 ...37/07... None.. ...48:1

5.71 ...40/07... None.. ...51:1

.

.

 

Differentials – Info

 

General Toy diff info including identification with pictures.

http://home.4x4wire.com/erik/diffs

 

"LPH" (Long Pinion Head) vs "SPH" (Short Pinion Head). by Drew Persson

http://www.pirate4x4.com/forum/showt...23#post1478223

 

Myth Settled: 8.4, V6, 4cyl, ALL 8" - by Brian Ellinger

http://www.pirate4x4.com/forum/showt...hreadid=228681

 

Pluging ABS sensor hole in late model diffs

http://www.pirate4x4.com/forum/showthread.php?t=587522

 

Differential picture identification by 4RnrRick

 

Toyota 2 pinoin 4 cylinder 7 1/2" diff (27 spline) used on 2wd and some celicas

http://tellico.off-road.com/wwwthrea...750_driver.jpg

 

Toyota 2 pinoin 4 cylinder 8" diff (30 spline)

http://www.4crawler.com/4x4/Images/Diff4Cyl.jpg

 

Toyota 4 pinoin 6 cylinder 8" diff (30 spline)

http://www.4crawler.com/4x4/Images/Diff6cyl.jpg

 

Toyota Land cruiser high pinion 8" diff (30 spline)

http://www.4crawler.com/4x4/Images/DiffHP.jpg

 

Toyota 4 pinion 6 cylinder 8" 3rd from a '96-00? 4Runner (30 spline)

http://www.pirate4x4.com/forum/attac...&postid=436184{broken}

 

Toyota 8.25 or 8.4 diff Taco / T-100 / Tundra (30 spline)

http://tellico.off-road.com/wwwthrea...100_tundra.jpg

 

 

 

 

Differential Mounting Differences Between Different 3rd Members

http://www.pirate4x4.com/forum/showt...52#post5331552

 

 

 

 

Differential - Shaved, Trussed, and Armored Axle Collection

http://www.pirate4x4.com/forum/showthread.php?t=456309 by TheBandit

http://www.pirate4x4.com/forum/showthread.php?t=228464

http://www.pirate4x4.com/forum/showthread.php?t=154306

http://www.pirate4x4.com/forum/showthread.php?t=93356

 

 

 

Differential Stud Upgrades - BEEF!!

http://www.pirate4x4.com/forum/showthread.php?t=485834

http://www.pirate4x4.com/forum/showthread.php?t=490532

Link to comment
Share on other sites

  • 2 months later...
driving or building you sink way to much money way to quick

 

soob or nonsoob you'll sink a lot of money. it's the nature of the beast, and the money has to get forked up to 4wheel hard. :rolleyes: i don't think i'm even near what i've sunk into the subaru in the toyota yet. it's fairly close though. the subaru has over the years well over $7k. the cost to strength ratio though...

Link to comment
Share on other sites

oh to only have have have 7k invested in my toy would be awsome i'm over twice that and still can't wheel it. i hate projects altogether. i never know when to say enough.

 

that's a very conservative estimate, and doesn't include the multitude of tires, consumables (ie replaced axles and stubs, trannies, differentials) or repairs over the years. just the straight to what it is cost. otherwise i'd be sitting here for days trying to run it all up. projects eat money, but in the end they can be worth it.

Link to comment
Share on other sites

  • 5 months later...
the majority of the truck axles come stock with 4.10 diffs. if you swap a legacy diff up front and a transfercase in, you could use the stock truck axles.

 

as for the toyota rear diffs from the trucks, all you need to know.... it appears 8" diffs come in 4.10 and up, 7.5" toy diffs came in 3.9. options with an 8" rear diff are innumerable, i'm not sure about lockers and such for the 7.5" diff

info from the www.pirate4x4.com/forum toyota FAQ... don't bother asking any questions over there unless you have thick skin...

 

 

Toyota Rear Axle Widths:

55" wide, '79-85 4wd trucks/4runners - 6 Lug

58" wide, '86-95 4wd trucks/4runners - 6 Lug

56" wide, '79-95 2wd Trucks - 5 Lug

60.75" wide, '95.5-up Tacomas/4runners

66.75" wide, '93-98 T100 trucks

 

Differentials – Gearing

 

Gearing..... with a 4 banger and single case

stock 4.10= 31 or smaller tire

4.88=33 inch tire

5.29= 35 to 38 inch tire.

5.71= NOT RECOMMENDED FOR REAL OFFROAD USE

 

Originally posted by DSI

----------------------------------------------------

83-older 4.11 diff's are 37/9 and are 8in 4cyl style diff's, in 84 they switched th the 41/10 ratio, any time you have more teeth to a pinion the stronger the diff will be, reason being: more tooth contact/more teeth contacting the ring gear at one time.

This is the same reason 5.71's are very weak, 6 teeth, 5.29's have 7, 4.88's and 4.38's have 8, 4.56's have 9 and 411's have 9, 410's have 10, and 390's have 10

----------------------------------------------------

 

Originally posted by TNToy

----------------------------------------------------

If you have the axle code of your vehicle, it is easy to find out what size differential, what ratio, and what pinion set-up you have. This will also help if you are hunting for a particular unit off another vehicle. The axle code is in the vehicle ID plate under the hood or drivers door. The axle code is 4 digits: a letter followed by 3 numbers.

 

Example: G292 = 8.0" 4.10 final ratio 2 pinion

Code:

 

1ST R&P SIZE 2nd/3rd R&P RATIO 4th DIGIT PINION SET-UP

F = 7.5" 07 = 3.900 2 = 2 pinion

G = 8.0" 08 = 4.110 3 = 2 pinion LSD

10 = 4.375 4 = 4 pinion

14 = 4.875 5 = 4 pinion LSD

25 = 4.556

28 = 4.300

29 = 4.100

31 = 3.91

38 = 3.42

43 = 3.56

54 = 3.90

66 = 3.07

.

.

 

Code:

 

Ratio Ring/Pinion Color Crawl:Ratio

3.42 ...42/12... Purple ...31:1

3.90 ...39/10... Red... ...36:1

4.10 ...41/10... Pink.. ...37:1

4.11 ...37/09... Orange ...37:1

4.30 ...43/10... Blue.. ...39:1

4.37 ...35/08... Green. ...40:1

4.56 ...41/09... Yellow ...41:1

4.88 ...39/08... White. ...44:1

5.29 ...37/07... None.. ...48:1

5.71 ...40/07... None.. ...51:1

.

.

 

Differentials – Info

 

General Toy diff info including identification with pictures.

http://home.4x4wire.com/erik/diffs

 

"LPH" (Long Pinion Head) vs "SPH" (Short Pinion Head). by Drew Persson

http://www.pirate4x4.com/forum/showt...23#post1478223

 

Myth Settled: 8.4, V6, 4cyl, ALL 8" - by Brian Ellinger

http://www.pirate4x4.com/forum/showt...hreadid=228681

 

Pluging ABS sensor hole in late model diffs

http://www.pirate4x4.com/forum/showthread.php?t=587522

 

Differential picture identification by 4RnrRick

 

Toyota 2 pinoin 4 cylinder 7 1/2" diff (27 spline) used on 2wd and some celicas

http://tellico.off-road.com/wwwthrea...750_driver.jpg

 

Toyota 2 pinoin 4 cylinder 8" diff (30 spline)

http://www.4crawler.com/4x4/Images/Diff4Cyl.jpg

 

Toyota 4 pinoin 6 cylinder 8" diff (30 spline)

http://www.4crawler.com/4x4/Images/Diff6cyl.jpg

 

Toyota Land cruiser high pinion 8" diff (30 spline)

http://www.4crawler.com/4x4/Images/DiffHP.jpg

 

Toyota 4 pinion 6 cylinder 8" 3rd from a '96-00? 4Runner (30 spline)

http://www.pirate4x4.com/forum/attac...&postid=436184{broken}

 

Toyota 8.25 or 8.4 diff Taco / T-100 / Tundra (30 spline)

http://tellico.off-road.com/wwwthrea...100_tundra.jpg

 

 

 

 

Differential Mounting Differences Between Different 3rd Members

http://www.pirate4x4.com/forum/showt...52#post5331552

 

 

 

 

Differential - Shaved, Trussed, and Armored Axle Collection

http://www.pirate4x4.com/forum/showthread.php?t=456309 by TheBandit

http://www.pirate4x4.com/forum/showthread.php?t=228464

http://www.pirate4x4.com/forum/showthread.php?t=154306

http://www.pirate4x4.com/forum/showthread.php?t=93356

 

 

 

Differential Stud Upgrades - BEEF!!

http://www.pirate4x4.com/forum/showthread.php?t=485834

http://www.pirate4x4.com/forum/showthread.php?t=490532

 

 

Ok I found a stock Tacoma rearend from a v-6 , what gear ratio is it ?? would it be 4.11 ??

 

also I Have a older style toyota rearend which is narrower , will the "punkin" from the taco fit into the older housing ??

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...