Jump to content
Ultimate Subaru Message Board

Can a timing belt change throw code PO420


Recommended Posts

I had my timing belt,tensioner,idlers,water pump,front seal and cam seal changed on Monday. (97 leg wagon 2.2 152k) Yesterday on my way home from my parts car my cel came on. I went to Autozone and had the code checked. It was the almighty PO420. I've been searching the message boards and found lots of stuff on this code. On one of the boards I read oil or coolant leak. Is there anyway this code is related to my timing belt swap?? It seams to be running fine and I've checked all the vacuum hoses a couple of times. No major leaks anywhere. Does the old disconnect you battery and run the system dead clear the code on a sub? I've never had to do it on an ODBII.

Edited by korrupt66
Link to comment
Share on other sites

I don't see how a timing belt job could cause a 420 code. It's probably a coincidence that it happened at the same time. I know the 2000 and up cars had trouble with the cat actually failing, but most of the 420 codes I've heard about on the older cars were caused by the oxygen sensors getting old and slow. It's probably time to replace both of yours.

 

On the OBDII cars, you need a scanner to clear the code.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...