Jump to content
Ultimate Subaru Message Board
Sign in to follow this  
michael appel

Lift kits

Recommended Posts

You will need longer brake lines and new shocks I can make you the lift for 600 but those are extra things you will need I can pick them up for you but thats a little extra I also just started making new front stabilizer bars Ill post them up soon I broke mine so I have made new double strength ones lol let me know what you want to do I can start making it right away.....

Its for a 86 brat

Share this post


Link to post
Share on other sites

Hey, I'm making a 4 inch kit and i saw that earlier in the thread you said the strut towers had to be at a 30* angle for an EA82? sounds like alot just wonderin if thats right or if the angle differs in response to the amount of lift? thanks, jack.

Share this post


Link to post
Share on other sites

15 degrees on top and on bottom it equals out to 30 degrees it is the perfect setup for 4 inch

 

Hey, I'm making a 4 inch kit and i saw that earlier in the thread you said the strut towers had to be at a 30* angle for an EA82? sounds like alot just wonderin if thats right or if the angle differs in response to the amount of lift? thanks, jack.

Share this post


Link to post
Share on other sites

A even 200 for the stuff and 25 for shipping either 4 or 6 its fine with me

 

How much for just the front and rear strut drops for an ea82 4" and 6" not sure how big i wanna go yet

Share this post


Link to post
Share on other sites

sweet how much would a whole six inch kit be will probably just go with the strut lowering stuff but just curious on the whole kit price will pm you when i can get the funding lol

Share this post


Link to post
Share on other sites
sweet how much would a whole six inch kit be will probably just go with the strut lowering stuff but just curious on the whole kit price will pm you when i can get the funding lol

 

500 i think 50 shipped

Share this post


Link to post
Share on other sites

How big of tires can I fit with a 4 inch and 6 inch lift with 14 inch wheels? How much to buy the lift nad have you install it if I bring it to you and how long would it take you to install it?

Share this post


Link to post
Share on other sites

I would only go with 27 inch with the stock motor you can get a 29 under it but with 14 inch rims only one tire is available at 28 inches tall and that is the bfg all terrain anyways um for a 4 inch install will be 450 I do not charge to install but it will take 2 days to install with a 6 inch it will be 600 anything else let me know

 

 

Mike

How big of tires can I fit with a 4 inch and 6 inch lift with 14 inch wheels? How much to buy the lift nad have you install it if I bring it to you and how long would it take you to install it?

Share this post


Link to post
Share on other sites

Apparently, Michael is not able to back up the products he sells. The kit I ordered in early March, and received, did not have all the proper pieces it was supposed to have. I have been quite patient, but I am quickly losing patience for not having what I ordered and paid for. I've sent PMs and email in the past, and still don't have everything I ordered.

 

Consider this a bad review from an unhappy customer. I would not order anything from him again. It has been 3 months since I first ordered the kit, and I still am without all the appropriate pieces. Which means I have a kit I can't use, since it requires everything to work. And if I paid for it, I damn sure want it.

Share this post


Link to post
Share on other sites
Apparently, Michael is not able to back up the products he sells. The kit I ordered in early March, and received, did not have all the proper pieces it was supposed to have. I have been quite patient, but I am quickly losing patience for not having what I ordered and paid for. I've sent PMs and email in the past, and still don't have everything I ordered.

 

Consider this a bad review from an unhappy customer. I would not order anything from him again. It has been 3 months since I first ordered the kit, and I still am without all the appropriate pieces. Which means I have a kit I can't use, since it requires everything to work. And if I paid for it, I damn sure want it.

 

Man, that's a bad deal...sorry to hear about that...

Share this post


Link to post
Share on other sites

I wasnt exactly thrilled about the quality of the kit I got. The welds were barely better than bird-************ welds. I had to reweld the strut blocks I purchased from him. Serious safety issue there.

 

I wasnt going to say anything, but maybe a touch of negative feedback will wake him up a bit to fill his orders and bring the quality control up a bit.

Share this post


Link to post
Share on other sites

Hey Michael,

 

I am looking for a 2" lift kit for my 98 legacy outback. Let me know if you can help me with it.

 

Thanks,

Share this post


Link to post
Share on other sites

I know I'm saving up for a 2" lift on my brat. Any idea how big a tire will fit on a 2"? (going to go to Toyota 15" rims)

Share this post


Link to post
Share on other sites
I know I'm saving up for a 2" lift on my brat. Any idea how big a tire will fit on a 2"? (going to go to Toyota 15" rims)

 

Depending on if you do much fender trimming, probably 27s or so, mayne 28s.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×