Jump to content
Ultimate Subaru Message Board

Red Sedan Build , solid rear axle


Scott in Bellingham
 Share

Recommended Posts

I've talked to the guy that has the John Deere Brat from WCSS10.

He's doing a Zuki case and cut the tunnel to clear it with the trans in the stock location.

Says the sheetmetal surrounding it will make a nice arm rest. And it's tucked up in with the body. Nothing hanging down. :)

 

mine is all protected like that too, but I wouldn't think the sheetmetal inside would be tall enough for an armrest? but could be different for a gen1, and if he clocks it or not....

Link to comment
Share on other sites

  • Replies 249
  • Created
  • Last Reply

Top Posters In This Topic

got the taco rear home, need to find a driveline next checked all the ones I have none fit

 

you'll need to get a Toy rear driveshaft (very strong) and have it made to the corret length, with either a Nissan flange, or an adapter to go from the toy flange to the nissan flange. my front shaft is made with a soob front yoke, and the back has a sammy flange and u-joint.

Link to comment
Share on other sites

God! Wonder how that feels when going only 25mph! its got to cause alot of vibration, Kinda sucks you'd need to trailer your rig to the wheeling area insted of driving it there.

 

But that is a nice soild shaft, no need to worrie on breaking those yokes!

 

-Tom

Link to comment
Share on other sites

3991589385_04f734da9f_o.jpg

 

Is this the new Aquafina 8" lift prototype?? :lol:

 

This thing is going to look awesome!! Are you going to link it in the rear, or just go with some springs and call it good? Since you have IFS still, i would look into doing a 4 link rear end, the suspension will cost more, but you're articulation will thank you for it.

Link to comment
Share on other sites

you only really want like 5 or 6 inches of uptravel anyway.so , i bet if the shocks , at a bottomed out position, also triangulated would accomplish being able to keep those tires up in there, but the pumpkin off of the gas tank

 

 

you will probably have a hell of a rake......:lol:

cheers, brian

Link to comment
Share on other sites

  • 2 months later...

it time to get back on this heres the planned revised specs

 

 

4.10 toyota rear end

4.10 subaru rear diff upfront

31" mudders would like to get some 32 x 9.50 TLS Swampers eventually, will wait till its runnin

 

dual transfercases, stock subaru and Nissan 720

 

bob the rear pinch the front

 

winch mounts front and rear

 

transverse buggy spring in rear with tons of flex with airshock overrides

 

engine not sure may go EA81 or carbed EJ or Atomic flux capacitor

 

would like to have it up and going for this summer season of Walker wheelin

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...