[Hi from Delaware!]

Air filter box is verrrry tight up against the pitchstopper mount

 

Exhaust headers are just a little rusty

 

Whooo hooooo!!

 

Next steps: fix the gear selector (somewhere between P and R is P, R is N, N is D) get the air out of the coolant system, bleed brakes, figure out something to do with the bumper (old one is in rough shape but will go back on with some effort), get after cat exhaust back on and tucked up higher, save up some money for tires. Super psyched!

[Hi from Delaware!]

some updated pictures, very excited to get it out on the road again soon!

 

required a bit of coercion to get the trailing arms in

 

rear subframe spacer

 

another angle on trailing arm bracket

 

one of the welded nuts broke off inside the body

 

back wheels are on the ground! stock tires look tiny

 

prettier in the snow

 

pitchstopper adjustment, hard to get my cordless drill on either side. used a dremel for pilot holes and drilled the big holes out from the passenger side.

 

fits up nicely

[Hi from Delaware!]

thanks for the welcome folks here's some pics of what we got done last night.

 

edrach, always run into people that have lived in DE wherever I go! If you grew up here the question is always "where did you go to high school", since there are only 40 something of them in the state. i went to middle school at springer, right around the corner from chalfonte. a neat experience was when I was flying home from florida with a bicycle, handed the counter guy my delaware license and turns out he grew up in middletown. we chatted, he checked the bike and waived the $50 fee, sweet!

 

dropping the engine low enough to get the subframe spacers in

 

transmission mount and control arm spacers

 

the control arm spacers were quite fussy to get lined up :/ my beautiful rattle can job is all scuffed, hehe

 

subframe spacer, spots of gray are some excess primer that is stuck on top of the orange

[Hi from Delaware!]

here are a few pictures

 

small garage we're working in

 

actual color is a safetyish orange, safety first

 

strut spacers are the only thing installed so far

 

hoping to have the rest of the lift blocks installed by next weekend

[Hi from Delaware!]

Been enjoying tinkering with my subarus (2.2 legacy 235k miles and 2.5 legacy outback 98k miles, both 1999 4EAT wagons) over the past year and at some point got the notion to lift the 2.2 and have some fun with it while learning some more about the cars. The lift is SJR 3" with outback struts. Everything on this car is rusty and the lift has taken longer due to many things having been neglected by me in the past 5 years. Probably about 2-3 weeks away from completion as I have limited free time to work with and am learning about everything as I go. Have gotten a lot of great information from USMB and glad my account is finally activated, thanks for having me! -brian

 

ps, I was going to post a few pictures but they display huge! rather than resizing the images, is there a way to display them smaller in the post? like img=50% or something?