[Transmission Casing Crack - 2013 Crosstrek]

On 4/11/2022 at 6:24 PM, idosubaru said:

It's been over 2 years that poster may not reply.  In case they don't reply.  They posted the size it appears to be M18x1.5.  

My local Advance Auto parts has M18x1.5 *nuts* in stock.  Take your bolt from the broken transmission threads into the store and verify it threads into the M18x1.5 nut they have in store.  Lowes and Ace Hardware stores often have big boards you can thread bolts into to determine their thread diameter and pitch too. 

Once you do that then order any M18 x 1.5 fastener, like a plug that he used, should work.  

The whole issue I was having is it was leaking a lot and I need something that gets tighter to make it a good seal. Before I had this issue I kept tightening it more and more to stop leak than it snapped just like in the photo. I got these bolts below trying to match with the guy in the photo above. I thought tapered meant they got tighter as they screwed in deeper. I hope they work. Any other advice if they don't?

[Transmission Casing Crack - 2013 Crosstrek]

I have an 2013 outback and this happened to me aswell. What bolt would I need for this fix? The same one? I found a few online on amazon but can you post a link? The engine is a 2.5 4cylender.