Hi all, Say I;ve looked in several locations, and have failed to find the old thread on 4.11 front dif. conversion. I.ve got both of my D/R tranys. torn down on the bench & it seems a good time to try this swap. A friend has offered me a donor. Trany. bad but dif. good. Can anybody aim me? Thanks, S.

here ya go. You have to start with a RX tranny. Its a bolt-in conversion as long as you use the Legacy viscous center diff and rear half. If you want to keep the RX locking center diff you need to have the 4.11 pinion gear welded on to the RX pinion shaft by a good machine shop.

 

http://ultimatesubaru.org/forum/showthread.php?t=106140&highlight=tranny+teardown

 

-Bill