zmarrott Posted June 11, 2016 Share Posted June 11, 2016 In the past I've had harness shorting issues and random blown fuses for head lights, so what I did was bypass the stock harness for the headlights, only reusing the relays for the new headlight harness I put together. I've also done an H4 headlight conversion. What id like to do now is integrate the stock light switches into my system to clean up my dash a bit. At the moment I have a pair of switches at the flat spot under the wiper switch for my headlights that I need to fix the mounting. I've identified the connector in the dash for the headlights switch, but not where the high beam wires are. Wires on the harness side of the connector are: Red Red w/yellow Red w/white Red w/green Black I'm wanting to know what each wire is in the connector I found and where the high beam wires are. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.