Guest jclay Posted June 9, 2004 Share Posted June 9, 2004 assuming that my local JY can provide me with a master wiper switch for a 94 legacy wgn, how hard will the install be? i'll need to open up the steering column, and pull off the steering wheel, but what else after that point? is the switch on a wiring harness? whats involved w/ pulling the steering wheel with regards to the airbag? has anyone out there ever done this before? thanks in advance jared Quote Link to comment Share on other sites More sharing options...
canajun2eh Posted June 10, 2004 Share Posted June 10, 2004 I don't think it's necessary to pull the steering wheel. The switch assembly is attached by means of two screws. It will all become clear after you have removed the steering column covers. Quote Link to comment Share on other sites More sharing options...
avk Posted June 10, 2004 Share Posted June 10, 2004 On gen. 1 and 2 Legacy, it looks like the switch slides out in the direction parallel to the steering column, towards the front of the car. The screws are accessible, but doesn't the mounting bracket for the switch housing get in the way? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.