Guest cole098 Posted July 23, 2003 Share Posted July 23, 2003 Does anybody have a part number or place where I can order replacement molding for a Cap/Topper??? I tried a local truck cap shop and Im not having any luck... Thanks Joe Quote Link to comment Share on other sites More sharing options...
Guest cole098 Posted July 23, 2003 Share Posted July 23, 2003 back up to top.... is this what bump means LOL Quote Link to comment Share on other sites More sharing options...
Guest james hogan Posted July 23, 2003 Share Posted July 23, 2003 If your talking about the seal that goes between the top and the rails on the bed, couldn't you just go to a place that sells camper tops and get the universal seal strip or is it a more specific type seal? Pictures? Regards, Jay Got your Emails last night. Will reply tonight. Regards, Jay Quote Link to comment Share on other sites More sharing options...
Guest EJ Posted July 23, 2003 Share Posted July 23, 2003 Hey Joe how did the top make the trip back up to PA.? Have you got'n your carb. problems fixed on your brat? Hope everything is working out with your roo.... Quote Link to comment Share on other sites More sharing options...
Guest ShawnW Posted July 24, 2003 Share Posted July 24, 2003 I called the manufacturer of my topper, Jerico. Yours might be a different manufactuer but just call the maker of the topper and they sell it by the foot. My topper manufacturer knew how long I would need. Quote Link to comment Share on other sites More sharing options...
Guest cole098 Posted July 25, 2003 Share Posted July 25, 2003 Well... I cut a very small piece off of the seal that goes around the cap... I showed it to the local Leer cap dealer and he said he can not order it... I checked for a name on my cap and there is none... Does anyone know of some more names of the cap.. So far I know GemTop and Jerico but any others... I would imagine that all the seals would be the same for this type of Cap... Or does anyone have a phone number where I could order???? I have a white low cap.... No Name on it..... Thanks Joe Quote Link to comment Share on other sites More sharing options...
Guest cole098 Posted July 27, 2003 Share Posted July 27, 2003 Watch out for the deer Quote Link to comment Share on other sites More sharing options...
Guest McBrat Posted July 30, 2003 Share Posted July 30, 2003 this is the stuff from Jeraco that Shawn ordered... 50 feet, I-SLEDGESEAL, Sportlid Edge Seal. $1.50/ft 50 feet was enough to do 2 I believe they told him.... <img src="http://members.aol.com/mickhorstman/capseal.jpg" style="border:0;"/> Quote Link to comment Share on other sites More sharing options...
Guest ShawnW Posted July 30, 2003 Share Posted July 30, 2003 Does your topper have a number stamped into the top near the center back by the glass gate? If so I would assume it is a Jeraco. www.jeraco.com/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.