dudesmccool

Just nervous about getting power to the harness correctly so I don't fry it

Text Will@ 5035979371

I'm pretty close to finishing the harness, but I need some help. Is anyone available in the Portland metro area to help/assist me with finishing it up? Money or beer for trade

I'm looking for the alldata 1996 2.2 ecu pin layout with complete numerical list. Does anyone know where I can find it?

I'm looking for the alldata 96 song 2.2 ecu pin layout with complete list. Does anyone know where I can find it?

I'm looking for the alldata 96 song 2.2 ecu pin layout with complete list. Does anyone know where I can find it?

!Need wiring help! what do I need to keep/cut? B36 black Instrument panel harness B37 clear B38 brown B39 blue - do I need this for wiring up to the gauges/etc? B61 clear Front wiring harness B62 clear B77 brown Mode actuator B79 grey Check connector B80 blue Instrument panel wiring harness B82 black Diagnostics connector

Then yes I soldered it

Finished brazing the copper elbows on the radiator last night. Looks sealed and a direct angle to the engine

Modified my lower ea radiator inlet last night. I brazed a 1" copper elbow on

Well the upper radiator hose is connected. I cut 1" off of the ea hose and put it on the upper outlet. I cut off 1" off both sides of the ej hose and clamped it down on the ea hose. Feels secure

Today I'm going to start tackling the coolant hoses. I already purchased a torch with silver solder(plumbing). Now I need to find some pics for reference and buy some copper elbows to braze.

Off-roading is like anal, it's not supposed to go there, but it feels so, so good

Keeping B75-B78. Not sure about B79 or B82

Wiring questions (96 Lhd ej22): B75/76 test mode connector green B77 mode actuator brown B78 data link connector yellow B79 check connector grey B82 diagnostics connector black Do I need any of these in the swap?