mawoofy

Third time lucky. Checked all fuses and connections again. Fiddled and played with everything again. Finally got a result. It was simply the cable/connection from the ignition to the starter that was a little bit niggly. It seemed to be attached fine, but guessing the metal inside the connector is worn or corroded and there was insufficient connection. Its still a little loose and iggly, but fixed for the short term. At least I know what is wrong with it before pulling the whole thing apart. Thanks everyone for your help, without these forums and utube help, I wouldn't even know what the starter motor was and how it worked. Learn something everyday. Cheers.

Thanks for the quick replys. I have since found a few other threads relating to the starter solenoid contacts and this sounds the likely cause. Although its a well looked after car, it is getting on in years and as far as I'm aware the starter hasn't previously been replaced. Changing the starter may even be too complicated for me but I think I will try the bang it with a hammer theory and see if that helps it at least for the short term. This has made me a little more optimistic anyway. Was resigning myself that it may be reduced to scrap metal.

My previously extremely reliable 1995 Subaru Legacy is stuck at my workplace because I cannot get it to start. Mechanics all away for xmas holidays and I desperately would like my car back. Just like a standard day got in it after work, turned the ignition and shockingly the engine would not start. No prior mishaps to suggest there was anything wrong with it. All fluid levels are normal. Engine was running normal that morning. Its not a battery issue (battery less than 12 mnths old - all the normal things work in the car - eg, radio, lights, windows, etc.). Terminals are all clean and connected fine. We even attempted to jumpstart it but to no avail. When the key is turned to start there is nothing but a slight clicking noise that can be heard. However when you hear this from under the bonnet it sounds as though it is closer to the ABS system (on the left fore corner) then the starter motor (back right of middle). Left it overnight with hopes that miraculously it may start the next day, but no avail. I am clever with my hands but I have no real mechanical skills (and I don't have access to a code reader - not that I would know how to use one anyway). Appears to me though that it may be an electrical issue? A faulty sensor or fuse? I will stop by my car again tomorrow and have a look at the fuse box, although I wouldn't really know what I would be searching for. Mechanics away on holidays for another week so have sought advice from the web. Read a lot of different starting issue threads, but haven't found any similar to this yet - Closest was a thread on this site "1996 Subaru legacy outback not starting" but didn't appear to have a solution. Has anyone experienced a similar problem that may have some advice? Any ideas would be helpful.