frizzyrick
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Posts posted by frizzyrick
-
-
Hey gang, I'm hoping to tap the pool of knowledge here to help figure out my tranny problem(?) Recently the POWER light on my wagon started flashing. I followed the test procedure I found on another thread here and it indicated 14: Shift Solenoid 2.
So, where do I go next? The reason I say problem(?) is that the car seems to be running well. This leads me to wonder whether this is just a electrical connection problem and if some degree of wire wiggling could save me from buying a $180 part. Can anybody provide me with some procedural troubleshooting tips?
Thanx!
'93 Legacy Wagon Auto transmission code problem(?)
in 1990 to Present Legacy, Impreza, Outback, Forester, Baja, WRX&WrxSTI, SVX
Posted
Sorry it has taken me so long to reply, I got called away for a trip to Colorado. But thank you for your help.
After scrolling further through the thread describing how to read the handshake method I found out that you are right. The code was two longs and four shorts: duty C solenoid.
I did some slow tight circle testing in a parking lot, but still was not able to detect any binding.
Next I pulled and reinstalled the fuse for the tcu, which cleared the Power code and then did a short drive resulting in another fault on the duty c solenoid.
What else might I check?