Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

northwestguy1

Members
  • Joined

  • Last visited

Everything posted by northwestguy1

  1. I have oil soaked spark plugs on the bottom side and I think my tube seals are bad but how do I get to them to replace them? I can take the valve cover off but the spark plug holes are above the plate.
  2. Question, I just bought a 1990 Legacy and it's supposed to have ABS but when I start my car the ABS light never glows. Would this be a bad bulb?
  3. Also the MAF sensor I bought only has 4 pins going to it but my old sensor which was factory (looks real old had 5 pins) The car runs fine no check engine light so did they change the pins on them now??
  4. Hey, I have a legacy 1990 with an automatic transmission. It was idling rough so I replaced the MAF sensor and put a new air filter in. The idle seems to be much better but when I have it in drive and stopped like at a light I get some rough surges and the idle is still a little rough. Any suggestions on what I can check next? Maybe the IAC? It has a real good response when accelerating so lacking no power since the MAF was replaced. Thanks
  5. So I did the procedure that you described and I get 2 flashes. How do I interpret this code to match the code table? Also I have a rough idle going on when the engine warms up. I cleaned my MAF sensor which helped a little but the idle is still rough. Should I check anything else? Thanks, Ben
  6. Hey everyone, I noticed a power light on my dashboard flashes 16 times when I start up my car what does this mean?? Thanks! Ben
  7. I found the Allen key hole to manually close/open the sunroof last night. It was located above the bench seat in the back past the dome light. Thanks again for your assistance:)
  8. So there is power to the sunroof. Fuses are good and I can press the open button and it goes backwards. When I press close I hear a click sound right above the cab dome light above the e brake. So would that be the control module I hear?? Thanks! Ben
  9. Hey, I just bought a 1990 Legacy SL and the sunroof wont close (when I press the close button nothing happens) as it's partially open. I have heard that there is a manual way to close the roof behind the map light console where the sunroof controls are? Thanks! Ben

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.