gtsoobie Posted February 2, 2004 Share Posted February 2, 2004 hi all I recently acquired two ej20 engines one turbo and one NA .. and one 1992 legacy wagon.. The NA has spat out the big end bearing on #1 and half the piston skirt with it..and the turbo ..well its missing a few bits.. knowing the compression ratio is lower for the turbo I need to know which bits I can interchange to make up a working NA engine.. the car it's going in had an NA in it so I dont want to F%$#% around converting it to turbo ( I already have a 92gt turbo 5 speed wagon) I am hoping the compression dif is in the heads, and not the pistons .. also is there any site which has info on engine tolerences?? I have the Haynes manual for a "Liberty" model (never heard of it in NZ!but the photo on the cover looks just like a legacy) and of all the 4 engines it covers it does not have my ej20DOHC.. Any help would be awesome cheers GWA Link to comment Share on other sites More sharing options...
Legacy777 Posted February 2, 2004 Share Posted February 2, 2004 may want to ask your question on http://www.bbs.legacycentral.org or http://www.rslibertyclub.org/forums There's some people on there that may be able to help you out. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now