baja Posted January 16, 2011 Share Posted January 16, 2011 ok ive had no luck finding a 2 in lift for a baja so i guess ill have to make one does anyone know how to figure out the angles for the front strut blocks so when i lift it the camber angle stays the same Link to comment Share on other sites More sharing options...
MilesFox Posted January 16, 2011 Share Posted January 16, 2011 Do some searching on the ea81/ea82 lifts, as the dimensions are posted somewhere. I think its some 1.5 inches for every 3 in of lift. I am not sure, but it may be something you can do some math to calculate. Otherwise the suspension geometry should remain the same relative to itself. Link to comment Share on other sites More sharing options...
lesstutrey Posted January 17, 2011 Share Posted January 17, 2011 i know at least two members on this board are making them. Baja strut tops are outback stut tops, since the baja is a .5" raised outback with a new skin. Front ends are identical Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now