my car is subaru gl 87' 1.8L.

my wagon have badly oil leak from head gasket and there's muddy oil when i parking lots. those made me headache buy new oil pint turn over again. im fed-up and buy new head gasket.

anyways;

when i was remove a valve cover and there have a cam-lobe.

so, i try remove a block of the cam-lobe. it's hard to remove also stuck. But somehow the cam-lobe's valve's a part fell down made me very anxious (look like a *rectangle with sliver there a hole* for support valve to cam-lobe) i don't know what called it. so, i did struggle a little longer try to put back away but helpfully i put some sticky grease on valve between cam-lobe and go back together.

so, i've been looking around internet and try think how to replace head gasket.

:banghead:

 

 

feedback me!

Some pics please? This might help us help you.

You might try getting a repair manual, Chilton, or Haynes. They have pretty good step by step instructions for most repair procedures. If you want I could scan the pages dealing with head gaskets and email them to you.

already have a friends who help me for put new head gasket.

yea, there have a suba manual book of wagon 87 1800.

thanks!