Hello,

 

I have a 97 Legacy GT wagon and I have noticed that when i raise the front passenger side window all the way to the top that it is about an 1/8th of an inch too hi. Then when i try and close the door it hits the metal bezel along the roof and leaves a gap.

 

Any ideas?

 

Thank you,

 

Mark

You'll need to remove the door panel and adjust the small bracket stops near the top of the door frame that limit the window travel. Loosen the bracket and adjust it when you have the window at the proper closed height.

 

If you are unsure about the panel removal use the search for location of the screws and fasteners.

Edited February 22, 201115 yr by Suzam
clarification and poor spelling :/

Thanks Suzam, That worked!