should i re toque on Subaru BECK/ARNLE- head gasket on EA82?

how much ft lb on nine bolts.

step one- 25 ft lb

step two- 43 ft lb

step three- 47 ft lb

after to step four to nine is 56 ft lb?

Just saw another one of your posts. Are you using FelPro or B/A Head Gaskets? FelPro are not supposed to need a retorque and are the recommended gasket on the board here.

Just saw another one of your posts. Are you using FelPro or B/A Head Gaskets? FelPro are not supposed to need a retorque and are the recommended gasket on the board here.

 

yea, i was replace new felpro but somehow have damage head gasket and milky coolant becuz of i was re-toque also over-tight after three steps..

 

so, B/A head-gasket should be re toque or not?

i'm ask how much ft lb for head cycle bolts?

 

i've been spend $ for three times, new head cycle also 8 times rebuilding on ea82. because of there was badly leaky (head cycle block, master cam-lobe leaky and oil pan leaky) im totally Polish.