After reading about everythread here and consulting my almost useless Clymer manual I still don't know where each of the 5 wires on my ignition switch goes.

 

My switch quit working so I'm going the pushbutton route but for the life of me I cannot find anything anywhere definitive on what wire goes where. The info I have found on the web contradicts one another and the diagram i have doesn't break down to the switch level.

 

Anybody know what goes where?

 

Once I get it all up and working i'll write up a ful SBS I promise.

 

Thanks!

 

 

Oh... it's a 91 Loyale 4wd M/T

Edited November 4, 201114 yr by ShutterAce
Forgot vehicle info

Got her all figured out and completed after work.

 

Here's a diagram of what I did. Works great.

Did your switch actually fail or did it start just going click when you turn the key?

Did your switch actually fail or did it start just going click when you turn the key?

 

The switch itself failed. The starter works great.