Well, I've started putting the EJ25 together in the back of my Bug, and as it turns out I did not take enough pics of all the hoses and crap.

 

So here it goes:

What does this thing do, and where does it connect to ?

I know it goes somewhere behind the intake (here):

But which one (see arrows) ?

 

Also, there is a hose that starts at the breather on each valve cover.

Where are all these connections for ?

 

And then there is this thing. Where does the long end of this tube go ?

 

Thanks !

 

Rob.

Almost everything there looks to be asscociated with the PCV system. If you've discarded the original intake tract for purposes of the swap, then you might have to re-plumb some of this, rather than re-connect it.

 

Each valve cover has a fresh air entry point (breather) which must be derived from a source of filtered air (post air filter). The 1/2" metal nipple looks like the PCV valve, which connects to a source of manifold vaccum.

The tank looks like an oil catch-can, but since I don't have anything like this on my '02, I can't comment, ditto on the plastic pitchfork thingy.

 

Well... don't know if that helped much :-\